Standard Drill Press Guard

From: $508.00

This general-purpose drill press guard is great for standard drill presses with belt-driven pulleys.  The shield swings open for easy access to the chuck area.

Safety Switch
Electrically Interlocked
Best Seller
Popular Choice!

Frequently Bought Together

Installation Kit for Safety Shields

This handy kit contains the small hardware needed to install Ferndale Safety products.

SKU: TR-2

Safety Shield for Drill Presses

Safeguard your drill press with this chuck shield. It features a see-through, adjustable shield. It attaches to the side of drill presses with as few as two bolts. We made the screen out of impact-resistant polycarbonate (Lexan™) material.

Most importantly, this guarding includes a built-in electrical safety interlock switch that is tamper-resistant. The safety interlock switch ensures the safety guard is in place before the machine can run.

It is excellent for any drill press, including versions with a belt-driven speed change system and a head unit around 100mm (4″) in width. The TR-2-SP-CM drill press guard version allows the screen and arm to be mounted closer to the machine.

  • The polycarbonate shield is adjustable and swings open to the left
  • Easy installation, with mounting bracket built-in
  • An electrical safety interlocking device is included.
  • Shield size: 200mm x 130″ (approx. 8″ x 5″), Vertical rod length: 500mm (19.68″)

This drill press chuck guard will help prevent ejections from accidentally leaving chuck keys inside the drill chucks.

These shields meet or exceed OSHA, ANSI, and CSA standards for machine safety guarding.

For more information about drill press safety and guarding, click here.

P/N Description
TR-2-S No Interlock Switch
TR-2-CM With Interlock Switch
TR-2-SP-CM Special Version with Interlock Switch

Easy Installation

Installation hardware and tools are not included. We offer a separate installation kit that contains the tools and equipment necessary to install this safety product.

You can buy the installation kit by clicking on the following link: Click here for the installation kit for this guard.

Spare Parts

REPLACEMENT SHIELD: https://www.ferndalesafety.com/shop/replacement-screen-for-tr-2-tr-7/

Our Other Safety Products

Check out our other machine safety products by clicking here.

Weight N/A
Dimensions N/A
Type

With Interlock Switch (Standard), With Interlock Switch (Small Bracket), Without interlock switch (Standard)

Machine Type

Standard Drill Press

Manufacturer

Ferndale Safety

Brand

Ferndale Safety

Has interlock switch

No (No Interlock), Yes (With Interlock)

Product color

Ferndale Yellow

Product Features

Bolt-on, Polycarbonate, Replaceable screen or shield, Adjustable

Disclaimer: By purchasing Our Products, you agree not to use them for "hot work" (e.g., welding, soldering, cutting) due to fire risk. Misuse is forbidden, and following all safety guidelines is required. Non-compliance means you accept full responsibility for any resulting harm or damage. For your safety and the effectiveness of Our machine guarding, remain within the "Safe Work Zone" directly in front of the guarding. Standing to the side increases injury risk and breaches our usage policy. Adhering to this rule ensures your safety and the Products optimal performance. For detailed safety and operational guidelines, please see our Terms and Conditions. (click here)

You may also like…