Installation Kit for Safety Shields


This handy kit contains the small hardware needed to install Ferndale Safety products.

In stock!


This tool kit helps with installing our safety products on machines. You will need a drill, screwdrivers, a tap wrench, and manual work. We are always here to help if you need it.

As this is a general-purpose kit, you might not need everything in it. Whatever you don’t use, please put it in your random drawer. You know which one—the one with old pennies, paper clips, various lengths and sizes of wires, and a trove of nuts and bolts you will never use. Yeah, that’s the one.

This kit includes:

  • 1x #7 drill bit
  • 1x 1/4-20 tap
  • 4x 1/4-20×3/4″ socket cap screws
  • 4x 1/4-20×1/2″ socket cap screws
  • Hex key
  • Electrical connectors
  • Zip ties
  • Cable clamps
  • Cable strain relief connector & Nut

Note: Product images are for illustrative purposes only and may differ from the actual product.

Additional information

Weight .25 lbs
Dimensions 6 × 4 × 1 in

Ferndale Safety


Ferndale Safety

Has interlock switch

No (No Interlock)

Disclaimer: By purchasing Our Products, you agree not to use them for "hot work" (e.g., grinding, welding, soldering, cutting) due to fire risk. Misuse is forbidden, and following all safety guidelines is required. Non-compliance means you accept full responsibility for any resulting harm or damage. For your safety and the effectiveness of Our machine guarding, remain within the "Safe Work Zone" directly in front of the guarding. Standing to the side increases injury risk and breaches our usage policy. Adhering to this rule ensures your safety and the Products optimal performance. For detailed safety and operational guidelines, please see our Terms and Conditions. (click here)