Note: This is the polycarbonate screen only. To get the polycarbonate screen with steel frame assembly, click here.
These are replacement shields for the following products:
- Model TF – Universal Lathe Chuck Shield
- Model FB/FBB – Standard Milling Machine Guards
- Model FA/FAB – Universal Mill Guard
- Model TR-3B – Radial Drill Guard
Use the diagram below to find which part corresponds to the approximate A & B dimensions. If you know the part number of our TF, FB, FBB, FA, FAB, or TR-3B safety guards, you can match the last seven characters of its part number to the last seven characters in the chart below.
Example: An FB-350H250 safety guard will have a PX-SCRP-350H250 replacement screen.
| P/N | A | B |
| PX-SCRP-200H130 | 8″ (200mm) | 5″ (130mm) |
| PX-SCRP-200H180 | 7″ (180mm) | |
| PX-SCRP-200H240 | 9.5″ (240mm) | |
| PX-SCRP-250H130 | 9 3/4″ (250mm) | 5″ (130mm) |
| PX-SCRP-300H180 | 11 3/4″ (300mm) | 7″ (180mm) |
| PX-SCRP-300H240 | 9.5″ (240mm) | |
| PX-SCRP-350H180 | 13 3/4″ (350mm) | 7″ (180mm) |
| PX-SCRP-350H240 | 9.5″ (240mm) | |
| PX-SCRP-400H180 | 15 3/4″ (400mm) | 7″ (180mm) |
| PX-SCRP-400H240 | 9.5″ (240mm) | |
| PX-SCRP-450H180 | 17 3/4″ (450mm) | 7″ (180mm) |
| PX-SCRP-450H240 | 9.5″ (240mm) | |
| PX-SCRP-500H180 | 19 1/2″ (500mm) | 7″ (180mm) |
| PX-SCRP-500H240 | 9.5″ (240mm) | |
| PX-SCRP-550H180 | 21 1/2″ (550mm) | 7″ (180mm) |
| PX-SCRP-550H240 | 9.5″ (240mm) | |
| PX-SCRP-600H180 | 23 1/2″ (600mm) | 7″ (180mm) |
| PX-SCRP-600H240 | 9.5″ (240mm) | |
| PX-SCRP-650H180 | 25 1/2″ (650mm) | 7″ (180mm) |
| PX-SCRP-650H240 | 9.5″ (240mm) | |
| PX-SCRP-700H180 | 27 1/2″ (700mm) | 7″ (180mm) |
| PX-SCRP-700H240 | 9.5″ (240mm) | |
| PX-SCRP-750H180 | 29 1/2″ (750mm) | 7″ (180mm) |
| PX-SCRP-750H240 | 9.5″ (240mm) | |
| PX-SCRP-800H180 | 31 1/2″ (800mm) | 7″ (180mm) |
| PX-SCRP-800H240 | 9.5″ (240mm) |
