DISCONTINUED – Self-Ejecting Drill Chuck Key

Self-ejecting drill chuck keys are safety devices that prevent themselves from being accidentally left inside drill chucks.

DISCONTINUED

SKU: FSEK-L

DISCONTINUED – Self-Ejecting Drill Chuck Key

Self-Ejecting Drill Chuck Key

The self-ejecting key has a pilot pin mounted on a spring load. The spring will prevent someone from leaving the key inside the chuck.

  • All Steel construction
  • Hardened pinions and nickel-plated handles
  • Standard and Self Ejecting (spring-loaded)
  • Spring ejects the key as soon as you let go.

Available Sizes


P/N Chuck Size (Reichel/Jacobs) Pilot Size # Teeth
FSEK-K0 #0 / K0 1/8 11
FSEK-K1 #1 / K1 5/32 11
FSEK-K2 #2  / K2 1/4 11
FSEK-K7 T4  / K7 7/32 11
FSEK-K32 T5SE / K32 1/4 10
FSEK-K3 T6 / K3 5/16 11
FSEK-K30 #13 / K30 15/64 10
FSEK-K4 #9 / K4 3/8 12
FSEK-K5 #26 / K5 7/16 12

Product Variations

Note: Use the selection boxes above to see specific information here.

P/N

FSEK-K0, FSEK-K1, FSEK-K2, FSEK-K7, FSEK-K32, FSEK-K3, FSEK-K30, FSEK-K4, FSEK-K5

Manufacturer

Ferndale Safety

Disclaimer: By purchasing Our Products, you agree not to use them for "hot work" (e.g., welding, soldering, cutting) due to fire risk. Misuse is forbidden, and following all safety guidelines is required. Non-compliance means you accept full responsibility for any resulting harm or damage. For your safety and the effectiveness of Our machine guarding, remain within the "Safe Work Zone" directly in front of the guarding. Standing to the side increases injury risk and breaches our usage policy. Adhering to this rule ensures your safety and the Products optimal performance. For detailed safety and operational guidelines, please see our Terms and Conditions. (click here)