This three-button control station controls motors on machinery. It can be used on devices with only physical on/off switches or as a secondary control station on big machines.
NOTE: THIS IS NOT A MOTOR STARTER OR ANTI-RESTART DEVICE. THIS IS ONLY A PUSH-BUTTON STATION. DO NOT CONNECT THIS PRODUCT DIRECTLY TO A MOTOR.
This control station is most often used with our 3-phase anti-restart panel. Click here to find out more about it.
Ferndale Safety 3-Button Control Station
- Polycarbonate plastic enclosure
- Red twist-to-reset emergency stop button with a yellow background.
- Green push button (flush mount)
- Red push button (raised)
- 1 NC contact for E-Stop button
- 1 NC contact for the red button.
- 1 NO contact for the green button.
Technical Characteristics
| [Ie] rated operational current |
3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1
6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-1 0.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 0.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 0.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 1.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1 |
|---|---|
| IP degree of protection |
IP66 conforming to IEC 60529
IP67 IP69 IP69K |
