- Easy installation – Four bolt installation on the ram – Easy leveling system.
- Interlock system integrates with the electrical system to turn off and disable spindle when guard is open.
- Positive action safety switches encapsulated inside a steel box enclosure.
- Many screen sizes to choose from – easy Lexan shield replacement.
- Easy adjustments to fit any machine and work style.
- Meets or exceeds government safety organization standards such as OSHA & CSA.
X: Shaft that holds rotating screen.
Y: Pivot point, the arm can be swung away to have full access to the table and spindle, adjustable in height.
Z: Gas strut to enable swing the screen up and down.
L: Adjustable in length and can rotate.
There are two types of screens available for milling guards; the half-moon screen and the flat screen types. To size the screen, you need to calculate the width of the milling head near the spindle and add about 80mm (3”) to that measure. This will give you approximately the diameter of the screen (A), in many case you will have to round up to the nearest screen size in the following table.
Left Or Right Mounting Available On Request.
|FAB-200H180||8″ (200mm)||7″ (180mm)|
|FAB-300H180||11 3/4″ (300mm)||7″ (180mm)|
|FAB-350H180||13 3/4″ (350mm)||7″ (180mm)|
|FAB-400H180||15 3/4″ (400mm)||7″ (180mm)|
|FAB-450H180||17 3/4″ (450mm)||7″ (180mm)|
|FAB-500H180||19 1/2″ (500mm)||7″ (180mm)|
|FAB-550H180||21 1/2″ (550mm)||7″ (180mm)|
|FAB-600H180||23 1/2″ (600mm)||7″ (180mm)|
|FAB-600P-Flat||23 1/2″ (600mm) – Flat||15.75″ (400mm) – Flat|
|FAB-650H180||25 1/2″ (650mm)||7″ (180mm)|
|FAB-700H180||27 1/2″ (700mm)||7″ (180mm)|
|FAB-750H180||29 1/2″ (750mm)||7″ (180mm)|
|FAB-800H180||31 1/2″ (800mm)||7″ (180mm)|
Note: FAB-600P-Flat —> flat screen 600mm X 400mm.
Installation hardware and tools not included. We offer a separate installation kit that includes tools and hardware necessary for installation of this safety product.
You can buy the installation kit by clicking on the following link: Click here for the installation kit for this guard.
Why Have Safety Interlocking?
An electrical safety interlock prevents the machine from operating when the shield is opened. This safety guard features an electric switch that disables the machine’s motor. The switch is made in such a way as to prevents easy bypass of the interlock switch.
When we do on-site visits, we often see safety shields moved to the side and never put back on the machine. An interlock is a simple solution to prevention of safety guard misuse or removal.